全國統一熱線：021-32205893
Elap線性線傳感器
Elap線性線傳感器具有以下特點：易于安裝，高度保護環境因素：ELAP線性線傳感器是需要高精度和長達15米的工業應用的理想解決方案;典型應用有：X-Y臺，液壓和向心氣瓶，包裝機，木工，玻璃，大理石，鈑金加工機械。
換能器由編碼器或通過線盤機構操作的電位器組成;電線是用不銹鋼覆蓋尼龍。
電位器HPS提供與線的線性位移成比例的模擬信號，而編碼器HLS提供與線的線性位移成比例的多個脈沖。內部彈簧控制電線返回到起始位置。
對于這兩種類型，行程速度為1000/2000 mm / sec，取決于行程，而粗壯的陽極氧化鋁外殼允許的防護等級為IP64。連接是通過1米長的電纜。操作人員一定會理解安裝方法，這是非常容易的。
線傳感器WPS和WDS包括帶有通訊協議的拉絲機構和Elap多圈絕??對高分辨率編碼器 - EtherCAT，PROFINET，Profibus，CANopen或SSI。換能器WPS和WDS包圍拉絲力學和Elap多圈絕??對高精度，具有通信協議的分辨率編碼器 - EtherCAT，PROFINET，Profibus，CANopen或SSI。
線編碼器HLS
行程范圍從1000毫米到12米
分辨率：0.04÷1 mm
系列HLS-S：行程1000毫米
系列HLS-M：500÷5000毫米行程
系列HLS-L：6000÷12000 mm行程
線編碼器HLS線電位器HPS
行程從250毫米到8米
電阻5 KOhm±10％
線性±0,02％FS
系列HPS-S：250÷1000 mm行程
系列HPS-M：500÷4000毫米行程
系列HPS-L：3000÷8000毫米行程
線電位器HPS
絕緣編碼器WPS 線編碼器HLS
帶通訊協議的編碼器：
EtherCAT，PROFINET，Profibus，CANopen，SSI。
筆畫數：2300或5000毫米
絕緣編碼器WDS 線編碼器HLS
帶通訊協議的編碼器：
EtherCAT，PROFINET，Profibus，CANopen，SSI。
筆畫數：3000至15000毫米
Elap線性線傳感器
Linear wire transducers
Stout, easy to install, highly protected against environmental agents: ELAP linear wire transducers are the ideal solution for those industrial applicationswhich require high accuracy and measuring length up to 15 metres; typical applications are: X-Y tables, hydraulic and pnematic cylinders, packing machines, and wood-, glass-, marble-, sheet-working machineries.
The transducer consists of an encoder or a potentiometer operated by means of a wire-reel mechanism; the wire is out of stainless steel covered with nylon.
The potentiometer HPS provides an analogue signal proportional to the linear displacement of the wire, while the encoder HLS provides a number of pulses proportional to the linear displacement of the wire. The inside spring controls the return of the wire to the starting position.
For both types the travel speed is 1000/2000 mm/sec., depending on the stroke, and the protection degree granted by the stout anodysed aluminium case is IP64. The connection is by means of a cable 1 m long. The operators will surely appreciate the mounting method, which is particularly easy.
Wire transducers WPS and WDS enclose the draw-wire mechanics and Elap multiturn absolute high-resolution encoder with communication protocol – EtherCAT, PROFINET, Profibus, CANopen or SSI.Wire transducers WPS and WDS enclose the draw-wire mechanics and Elap multiturn absolute high-resolution encoder with communication protocol – EtherCAT, PROFINET, Profibus, CANopen or SSI.
Wire encoder HLS
Strokes ranging from 1000 mm to 12 m
Resolution: 0.04 ÷ 1 mm
Series HLS-S: 1000 mm stroke
Series HLS-M: 500 ÷ 5000 mm stroke
Series HLS-L: 6000 ÷ 12000 mm stroke
Wire encoder HLS
Wire potentiometer HPS
Strokes ranging from 250 mm to 8 m
Resistance 5 KOhm ±10%
Linearity ±0,02% FS
Series HPS-S: 250 ÷ 1000 mm stroke
Series HPS-M: 500 ÷ 4000 mm stroke
Serie HPS-L: 3000 ÷ 8000 mm stroke
Wire potentiometer HPS
Wire encoder HLS
Absolute encoder with communication protocol:
EtherCAT, PROFINET, Profibus, CANopen, SSI.
Strokes: 2300 or 5000 mm
Wire encoder WPS
Wire encoder HLS
Absolute encoder with communication protocol:
EtherCAT, PROFINET, Profibus, CANopen, SSI.
Strokes: 3000 to 15000 mm
Wire encoder WDS
|
||
|
||
 |
